Ultra Dry Dehumidifier 55L

The UltraDry is a refrigerant Dehumidifier with dent-resistant rotational housing,
a washable air filter, a hot gas bypass defrosting system and a removable water
pump.
The water pump connects to a drainage hose, which is stored on the back of the
dehumidifier and the unattached end of the drainage hose can be placed into a
vessel, basin, toilet or directed outdoors.
For wetter environments, there is an option to connect a vent hose to assist with
drying the area.
The best drying will occur between 40% – 50% humidity.

Vent Hose / Ducting
• A vent hose (ducting), with a diameter larger than 150mm can be connected to
the UltraDry via the exhaust ring to speed up drying the wet area.
• The UltraDry should be located in one room, ducting the outlet air into another
room.
• Go as far as the flexible ducting will allow, to maximise consistent ACH (air
changes per hour) throughout the building.
• Air movement throughout the building is critical in controlling the
dehumidification process.

Best Practice
• Operate the UltraDry in an enclosed area, as this creates
a drying chamber.
• Close all doors, windows or areas that open to external
areas to maximise the dehumidifier’s water removal
efficiency.
• Keep traffic through the drying chamber to a minimum.
• Place the UltraDry in the center of the room away from walls and furnishings.
• Do not allow the airflow to be obstructed.

Technical Specifications: UltraDry 55L
Model: UD-55L
Air Volume: 350m3 / h
Moisture Removal Capacity: 55L / day
Compressor: Hitachi
Power Supply: 220-240V / 50Hz
Product Size (W x D x H): 545 x 500 x 638 mm
Power Consumption: 720W
Net Weight: 39kgs