Upgrade your rig with a powerful NEW
Reactor 3 proportioner, built with advanced capabilities for spray foam and polyurea applications. Reactor 3 is designed to communicate with the entire system to simplify the operator’s job, optimize spray parameters and maximize productivity.
Helps Eliminate the Largest Casues of Off-Ratio Issues
Katalyst, the new Reactor 3 software, provides the highest level system intelligence to optimize spray, eliminate ratio issues, improve yield, to help deliver quality results every time
Issue: Air in the fluid stream
Katalyst: Automatically shuts the system down when material has run out so air does not enter into the fluid system
Issue: Improperly feeding the Reactor with material
Katalyst: Automatically adjusts power to the pumps to always provide optimal material feed to the Reactor, such as helping to eliminate issues related to cold materials
Reactor 3 Elite model with Core E1 Transfer Pumps are necessary to activate Katalyst System Intelligence. Standard and Pro models can upgrade hardware to activate Katalyst System Intelligence.
Reactor 3 E-30 Elite Model Features and Benefits in Product Brochure Below
Standard |
Pro |
Elite |
|
FEATURES | |||
Touchscreen ADM | ✓ | ✓ | ✓ |
Brushless Motor | ✓ | ✓ | ✓ |
Active ISO Lube Pump | ✓ | ✓ | ✓ |
Data Download with USB | ✓ | ✓ | ✓ |
Simple Inlet Filters (Y-strainers) | ✓ | ||
Large Easy-Access Inlet Filters | ✓ | ✓ | |
Small Recirculation Valves | ✓ | ||
Large Recirculation Valves | ✓ | ✓ | |
Large Heater Options | ✓ | ✓ | |
Reactor Connect Cell Module | ✓ | ✓ | |
Drum-Level Dipsticks | ✓ | ✓ | |
Katalyst Full System Control | ✓ | ||
Ratio Assurance | ✓ | ||
Inlet Temperature & Pressure Sensors | ✓ | ||
Generator Dashboard | ✓ | ||
Optimized for Core E1 Transfer Pumps | ✓ | ||
SOFTWARE | |||
Independent A & B Hose Heat | ✓ | ✓ | ✓ |
Resistence Control Mode | ✓ | ✓ | ✓ |
Auto Pressure Balance | ✓ | ✓ | |
Power Management | ✓ | ✓ | |
Automatic Software Updates via Cellular | ✓ | ✓ | |
Smart Control | ✓ | ||
Smart Supply | ✓ | ||
INCLUDES | |||
Externally Heated (EH) Hose Packages Available | Yes | Yes | Yes |
Internally Heated (IH) Hose Packages Available | Yes | Yes | Yes |
Whip Hose Length | 10 ft in EH packages, 20 ft in IH packages |
10 ft in EH packages, 20 ft in IH packages |
20 ft |
Single Heated Hose Package | 1 x 50 ft EH or IH packages | 1 x 50 ft EH or IH packages | 1 x 50 ft EH or IH packages |
Multi Heated Hose Package | 4 x 50 ft EH package, 2 x 100 ft IH package | 4 x 50 ft EH package, 2 x 100 ft IH package | 4 x 50 ft EH package, 2 x 100 ft IH package |
Engine Cable | No | No | Yes |
Packages with Core E1 Pumps Available | No | No | Yes |
Standard |
Pro |
Elite |
||||||
Reactor 3 Model | E-20 | E-30 | E-20 | E-30 | E-20 | E-30 | ||
Brushless Motor | 1.8 HP | 2.5 HP | 1.8 HP | 2.5 HP | 1.8 HP | 2.5 HP | ||
Max Flow | 2 GPM | 3 GPM | 2 GPM | 3 GPM | 2 GPM | 3 GPM | ||
Max Pressure | 2000 psi | 2000 psi | 2000 psi | 2000 psi | 2000 psi | 2000 psi | ||
Primary Heat | 7 kw | 10 kW | 7 kw | 10 kW | 10 kW | 15 kW | 10 kw | 15 kW |
Heat Block | Single | Single | Single | Single | Single | Dual | Single | Dual |
Max Hose Length | 220 ft | 320 ft | 220 ft | 320 ft | 220 ft | 320 ft |
Standard |
Pro |
Elite |
||||
Reactor 3 Model | E-XP1 | E-XP2 | E-XP1 | E-XP2 | E-XP1 | E-XP2 |
Brushless Motor | 1.8 HP | 2.5 HP | 1.8 HP | 2.5 HP | 1.8 HP | 2.5 HP |
Max Flow | 1.5 GPM | 2 GPM | 1.5 GPM | 2 GPM | 1.5 GPM | 2 GPM |
Max Pressure | 3000 psi | 3500 psi | 3000 psi | 3500 psi | 3000 psi | 3500 psi |
Primary Heat | 10 kw | 15 kW | 10 kw | 15 kW | 10 kw | 15 kW |
Heat Block | Single | Dual | Single | Dual | Single | Dual |
Max Hose Length | 220 ft | 320 ft | 220 ft | 320 ft | 220 ft | 320 ft |
The new larger interface provides simple touchscreen operations and makes the Reactor easy to operate. All the necessary spray information and control is on one screen, making it intuitive and easy to understand. New setup menus offer more controls than ever for owners and managers to optimize the machine for their business needs.
Picture shown represents an Elite model.
Click below to try Graco’s ADM simulator
Reactor Connect is designed for both Sprayers and Owners/Managers alike. Use Reactor Connect to track ratios, receive alerts and view data directly from your smartphone. As a result, owners/managers can monitor rigs, access reports, troubleshoot issues from anywhere and get the crew back to work quickly.
Get in the flow with Graco’s revolutionary NEW Core electric transfer pumps; designed to optimize material supply and minimize downtime. Quieter and less expensive to operate than traditional pneumatic pumps, the new electric pumps can communicate with the Reactor 3 to give you a fully-connected system.
Senses when a drum is empty and automatically shuts down the transfer pumps and Reactor 3 proportioner before damage occurs, including air entering the system and that can compromise ratio.
The software automatically monitors and adjusts Reactor 3 proportioner inlet pressures to optimize material feed and on-ratio performance. Maintains inlet pressure between 80-200 psi — boosting power to the transfer pump’s electric motors when needed. Achieve Smart Supply when using Core E1 pumps with a Reactor 3 Elite model.
The Core E1 Pump is up to 6X quieter than pneumatic pumps. That’s equivalent to reducing the sound in your rig from being as loud as a motorcycle to that of a car.
WATCH: The NEW Core E1 Transfer Pump
With our exclusive ProConnect technology, you can quickly disconnect the motor from the pump lower and easily transfer the pump from drum to drum…even in low ceiling height rigs. Paying for taller rigs or having to tip the drum to remove the pump is no longer necessary. ProConnect is available on both the E1 and T4 pumps.
TIP: Have an extra pump lower installed on your rig to make changing drums even faster and cleaner.
Connecting your motor to the lower just got as easy as 1, 2, 3.
Step 1: Loosen T-handle
Step 2: Open Pump Clamp
Step 3: Slide Electric Motor to Remove
Graco’s new Xcelerator heated hoses provide more options and control than ever. All Xcelerator hoses are designed to provide full independent A and B temperature control. This provides more precise pressure balancing and improved material yield. New robust construction provides longer life and reduced maintenance.
Internally Heated Hose, 100 ft
Externally Heated Hose, 50 ft
The robust, compact design allows the heating element to enter/exit the fluid stream at each hose joint without adding significant size or weight.
Hose connections that are lightweight and robust. Designed to provide strong, reliable electrical connections and are uniquely keyed to prevent incorrect connections.